Mint Green Small Cat Tree with Curved Scratcher

The Mint Green Small Cat Tree with Curved Scratcher is part of PETSBELLE's indoor cat furniture range. This small cat tree is organized around a curved scratching ramp, two horizontal wrapped bars and a hanging rope detail. It is a floor-level scratching and activity piece rather than a tall tower with several sleeping platforms.

Mint green design with an arched scratching surface

Technical Details and Fit

Compare the Usable Resting Areas

At 43 cm high, the design can suit an assortment focused on lower furniture. Check the curved scratching surface width and the reach to the horizontal bars, and allow room in front for a cat to approach and stretch.

A Low Curved Scratcher for Floor Level Activity

A Curved Scratching Surface in a Compact Frame

This cat tree places scratching at the center of the design. A broad curved board rises from the base to meet the upper frame, creating a continuous textured surface. The open space beneath the arch keeps the two horizontal scratching posts and suspended rope visible within the same structure.

An Arch That Changes the Scratching Angle

The sweeping profile gives this cat scratcher a surface that changes angle from the lower section to the top. Fabric-covered edges outline the curve and coordinate with the base and side supports. The result is a clearly defined scratching area framed by a soft mint green color.

Horizontal Posts and a Hanging Rope Toy

Two rope-wrapped posts span the side supports at different heights. They add horizontal scratching surfaces beneath the main board, while a hanging rope toy introduces a separate play detail inside the arch. The curved board and crosswise posts give this design its distinctive arrangement.

Planning the Pet Area

The design can be considered for a living room cat corner, an apartment or another indoor activity area. Its curved outline and mint green covering provide a visible accent alongside surrounding furniture. Select a position with clear access to the scratching board and open sides, using the confirmed assembled dimensions to plan the space.

From Sample Selection to Order Delivery

New Customer Sample Policy

PETSBELLE charges new customers for samples and allows the previous sample fee to be deducted from a subsequent order payment. Ask for the sample quotation and record the selected version before arranging shipment.

Purchasing Schedule

The Mint Green Small Cat Tree with Curved Cat Scratcher has an order lead time of 45 days after order placement. Provide the model, quantity and target market when requesting a quotation. Record the agreed MOQ and color split before ordering, and distinguish the order lead time from any separately quoted transit time.

Packing for Shipment

Support the curved panel so that transit pressure does not flatten or bend its intended profile. Separate exposed fasteners from the mint fabric and show the bar positions in the packed carton.

Record the final outer carton dimensions and weigh the packed unit for gross weight. Net weight should describe the product without shipping packaging. Agree the quantity per carton, hardware bag identification, assembly sheet language and shipping marks before the packaging specification is finalized.

Why Source This Design from PETSBELLE

PETSBELLE develops original pet product designs, with registered patents covering selected styles in the collection. Larger purchasing projects can receive close OEM/ODM cooperation; smaller requirements can explore PETSBELLE brand distribution. Ask which patent documentation applies to the selected style when this is part of your sourcing requirements.

Start with the intended cat size and retail channel, then confirm structure, material options and packing. Sample approval should record the version, finish and accessory list so the production order refers to the same configuration.

Installation and Inspection Points

Putting the Components Together

Use the model-specific parts list and assembly instructions supplied with the ordered version. The following points help buyers plan installation and review a sample; they do not replace the final hardware diagram.

1. Lay out the base, curved panel, side supports and wrapped bars. Match each fastener to the supplied diagram rather than choosing by appearance alone.

2. Follow the indicated sequence to align the curved panel with the base and side frame. Do not force a screw through a misaligned hole.

3. Check both horizontal bars and the hanging accessory connection. Set the product on a level floor and confirm that the frame does not rock before use.

Maintenance of Surfaces and Connections

Brush debris from the curved scratching surface in the direction that avoids lifting its edges. Check the attachment around the curve and the condition of the hanging rope. Stop use if a bar becomes loose or the accessory starts to unravel.

Component Checks Before Order Approval

Inspect panel-edge attachment, bar alignment, exposed hardware and the transition between the curved scratcher and the base. These details matter more here than the number of sleeping levels.

For daily use, place the product on a level indoor surface and keep approach areas clear. Stop use if a support, attachment or surface is damaged. Follow any anchoring instructions provided for the final version; children should not climb on the product.

Finish Options for Your Collection

The listed materials for this version are rabbit fabric/sofa fabric , sisal rope , sisal carpet. Review proposed fabric changes together with the bed shapes and cleaning requirements for this design.

Collection fabric and color options for customization discussions

Chipboard, MDF, plywood, rubber wood and birch board are shown in the collection guide. These are options for discussion, not a statement that all are used in this product. Agree the chosen board, thickness and finish for the approved version.

Board options must be matched to the selected construction

Specifying the Support Components

Confirm the internal support construction independently of the outer wrapping. The collection guide below is a discussion aid, not the bill of materials for every model.

Collection post material options

Sisal rope, paper rope and jute rope are shown below. Keep the quoted rope specification consistent with the material table, and identify any flat scratching carpet separately from wrapped posts. Approve changes to texture, shade or coverage on the selected sample.

Rope choices for the agreed sample specification

Custom Production and Quality Control

PETSBELLE manages quality from product development and order confirmation through production and after-sales follow-up. This process helps wholesale, OEM and private-label buyers align the approved sample, materials, construction, packaging and commercial requirements before mass production begins.

Before production, our team reviews the product design, selected materials, structural details and foreseeable risks against the confirmed specification. During manufacturing, incoming materials, first samples, key process stages, finished products and packed goods are checked at the relevant control points. Inspection criteria and any buyer-specific testing should be agreed in writing before the order is released.

The supplied compliance documents include an amfori BSCI monitoring summary for Hangzhou Petsbelle Tech Co., Ltd. and an FSC Chain of Custody certificate for Hangzhou Petsbelle Product Co., Ltd. BSCI social-compliance practices and FSC-certified wood or paper inputs may be discussed where they apply to the selected product or packaging. Certification does not mean that every product or material is FSC certified. Certificate validity, legal entity and site, certified scope, claim or label use, material availability and order requirements must be confirmed before production.

Customer feedback and quality concerns are recorded and reviewed. When an issue requires further action, corrective and preventive measures may be used to identify the cause, resolve the current case and reduce the likelihood of recurrence. Buyers can confirm quality standards, inspection or testing needs, packaging controls and certification documentation for each wholesale, OEM or private-label project.

Supplied FSC Chain of Custody certificate and amfori BSCI monitoring summary. Confirm current validity and the applicable scope before production.

Product Questions and Wholesale Enquiries

Does this design include a sleeping condo?

No enclosed condo is shown. Its main functions are scratching and floor-level activity, so describe the curved panel and wrapped bars rather than presenting it as a multi-bed tower.

What makes this a low scratching design?

The overall size is 40 × 40 × 43 cm. The curved surface and horizontal bars concentrate activity close to floor level, without the stacked condos and sleeping platforms found on a tall cat tower.

Which details are important in packaging and inspection?

Protect the curved panel against pressure that could change its shape, check the panel edges and confirm both bar connections are secure. Keep hardware from rubbing against the mint covering during shipment.

How are the sample fee and the later order handled?

PETSBELLE charges new customers for samples and allows the previous sample fee to be deducted from a subsequent order payment. Ask for the sample quotation and record the selected version before arranging shipment.

What is the order lead time?

The order lead time is 45 days after order placement. Confirm the dispatch schedule and transport arrangements in the quotation. The MOQ must be agreed for the chosen model, color quantities and customization requirements.

What information helps resolve an assembly or delivery issue?

Send the model, order reference, affected part number and clear photographs of the connection or packaging. Describe when the issue appeared so PETSBELLE can review it. Confirm warranty duration, replacement terms and any return arrangement in the written order agreement.

Request a quotation for the Mint Green Small Cat Tree with Curved Cat Scratcher from PETSBELLE. Share your quantity, preferred finish, destination and packaging requirements to discuss the appropriate wholesale or OEM/ODM arrangement.