Cream Cat Tree with Elevated Bed and Scratching Ramp

The Cream Cat Tree with Elevated Bed and Scratching Ramp is part of PETSBELLE's indoor cat furniture range. This cream cat tree places a rounded enclosed bed above a square base, with a broad inclined scratching board at the front. Lamb fleece, sisal rope and sisal carpet are listed materials for this configuration.

Cream design with an elevated enclosed condo and inclined scratching board

An Elevated Enclosure With an Inclined Scratching Surface

An Elevated Enclosed Resting Area

This cat tree focuses on a covered retreat above the base. The upper bed takes the form of an enclosed cat condo with rounded outer corners and a circular front entrance. Its textured cream covering continues across the exterior, giving the resting area a distinct shape within a simple vertical structure.

A Sloping Surface for Scratching

An inclined scratching board extends upward from the base beneath the condo. Its broad textured face is bordered by fabric-covered edges that coordinate with the rest of the cat tree. This sloping surface adds a different scratching angle from the upright post behind it.

A Wrapped Post within an Open Lower Frame

The visible post beneath the condo includes rope-wrapped sections, providing a rounded scratching surface alongside the flat board. Space remains open around the lower supports, while the fabric-covered base ties the structure together visually. The layout concentrates on an enclosed resting area and two forms of scratching surface.

Indoor Placement and Access

The design can be considered for a bedroom, living room or designated pet area where an enclosed resting spot is preferred. Its cream finish and rounded upper shape coordinate with soft furnishings. Position it with clear access to the circular entrance and scratching board, and check the assembled footprint against the available space.

Dimensions Materials and Buying Criteria

Selection Points Beyond Overall Height

Check the circular entrance diameter and the internal bed dimensions first. The inclined panel offers a scratching surface, but its appearance alone does not establish that it is an accessibility ramp for older or mobility-limited cats.

Wholesale Supply and Shipment Preparation

Sampling Before Bulk Purchasing

Samples are chargeable for new customers. The earlier sample charge can be credited against payment for a later order. Refer to the sample invoice when discussing that order; sample charges and any separately quoted freight should be identified clearly.

Order Quantity and Delivery Planning

The Cream Cat Tree with Elevated Bed and Scratching Ramp has an order lead time of 45 days after order placement. For mixed finishes or custom packaging, list the quantities for each version in the enquiry. The MOQ field is reserved for the agreed figure; shipping transit and the delivery destination should be confirmed separately.

Protecting Components in the Carton

Cushion the rounded enclosure and protect the inclined board from concentrated pressure. Keep the fastener bag from contacting the entrance lining and show the separation of large components.

Record the final outer carton dimensions and weigh the packed unit for gross weight. Net weight should describe the product without shipping packaging. Agree the quantity per carton, hardware bag identification, assembly sheet language and shipping marks before the packaging specification is finalized.

Custom Development with PETSBELLE

PETSBELLE develops original pet product designs, with registered patents covering selected styles in the collection. Larger purchasing projects can receive close OEM/ODM cooperation; smaller requirements can explore PETSBELLE brand distribution. Ask which patent documentation applies to the selected style when this is part of your sourcing requirements.

Use a written brief covering dimensions, resting features, covering, rope and packaging. Review the physical sample against that brief, document agreed changes and use the approved version for the order.

Customization of Covered Surfaces

The listed materials for this version are lamb fleece , sisal rope, sisal carpet. Start a customization enquiry from this specification, then identify the covering and color changes required for your market.

Collection fabric and color options for customization discussions

Chipboard, MDF, plywood, rubber wood and birch board are shown in the collection guide. These are options for discussion, not a statement that all are used in this product. Agree the chosen board, thickness and finish for the approved version.

Board options must be matched to the selected construction

Post Cores and Rope Selection

Confirm the internal support construction independently of the outer wrapping. The collection guide below is a discussion aid, not the bill of materials for every model.

Collection post material options

Sisal rope, paper rope and jute rope are shown below. Keep the quoted rope specification consistent with the material table, and identify any flat scratching carpet separately from wrapped posts. Approve changes to texture, shade or coverage on the selected sample.

Rope choices for the agreed sample specification

Using and Maintaining the Structure

A Practical Assembly Sequence

Use the model-specific parts list and assembly instructions supplied with the ordered version. The following points help buyers plan installation and review a sample; they do not replace the final hardware diagram.

1. Identify the upper enclosure, inclined panel, base and supports from the supplied parts list.

2. Connect the enclosure and supports in the specified order. Align the inclined panel with its upper and lower fixing points before tightening.

3. Inspect the bed connection and the panel edges. Confirm that no fastener is exposed inside the enclosure and that the base does not rock.

Keeping the Resting Areas Clean

Remove debris from the enclosed bed and brush the sisal carpet without lifting its edges. Use only the permitted cleaning method for the fleece. Do not immerse the enclosure or assume that its cover can be removed.

What Buyers Should Check on a Sample

Check the enclosure-to-support connection, round doorway finish and both ends of the inclined board. Verify the board surface is identified as sisal carpet rather than rope wrapping.

For daily use, place the product on a level indoor surface and keep approach areas clear. Stop use if a support, attachment or surface is damaged. Follow any anchoring instructions provided for the final version; children should not climb on the product.

Custom Production and Quality Control

PETSBELLE manages quality from product development and order confirmation through production and after-sales follow-up. This process helps wholesale, OEM and private-label buyers align the approved sample, materials, construction, packaging and commercial requirements before mass production begins.

Before production, our team reviews the product design, selected materials, structural details and foreseeable risks against the confirmed specification. During manufacturing, incoming materials, first samples, key process stages, finished products and packed goods are checked at the relevant control points. Inspection criteria and any buyer-specific testing should be agreed in writing before the order is released.

The supplied compliance documents include an amfori BSCI monitoring summary for Hangzhou Petsbelle Tech Co., Ltd. and an FSC Chain of Custody certificate for Hangzhou Petsbelle Product Co., Ltd. BSCI social-compliance practices and FSC-certified wood or paper inputs may be discussed where they apply to the selected product or packaging. Certification does not mean that every product or material is FSC certified. Certificate validity, legal entity and site, certified scope, claim or label use, material availability and order requirements must be confirmed before production.

Customer feedback and quality concerns are recorded and reviewed. When an issue requires further action, corrective and preventive measures may be used to identify the cause, resolve the current case and reduce the likelihood of recurrence. Buyers can confirm quality standards, inspection or testing needs, packaging controls and certification documentation for each wholesale, OEM or private-label project.

Supplied FSC Chain of Custody certificate and amfori BSCI monitoring summary. Confirm current validity and the applicable scope before production.

Product Questions and Wholesale Enquiries

Can the inclined board be advertised as a ramp for senior cats?

Not on the supplied information alone. Describe it as an inclined scratching board; suitability as an access route depends on its angle, grip, dimensions and the individual cat.

Which measurements matter for the elevated enclosed bed?

The overall size is 48 × 48 × 89 cm. Check the round entrance diameter, internal bed area and clearance to the base separately. These details help a buyer assess access and usable rest space.

How is the inclined board different from the wrapped support?

The material list includes both sisal carpet and sisal rope. The front board provides a broad flat surface at an angle, while the support has a rounded wrapped section. Their attachment and wear points differ.

How are the sample fee and the later order handled?

Samples are chargeable for new customers. The earlier sample charge can be credited against payment for a later order. Refer to the sample invoice when discussing that order; sample charges and any separately quoted freight should be identified clearly.

What is the order lead time?

The order lead time is 45 days after order placement. Confirm the dispatch schedule and transport arrangements in the quotation. The MOQ must be agreed for the chosen model, color quantities and customization requirements.

What information helps resolve an assembly or delivery issue?

Send the model, order reference, affected part number and clear photographs of the connection or packaging. Describe when the issue appeared so PETSBELLE can review it. Confirm warranty duration, replacement terms and any return arrangement in the written order agreement.

Request a quotation for the Cream Cat Tree with Elevated Bed and Scratching Ramp from PETSBELLE. Share your quantity, preferred finish, destination and packaging requirements to discuss the appropriate wholesale or OEM/ODM arrangement.